October, 2022: Kimang'eti Community Spring Protection Complete!
Kimang'eti Community now has access to clean water! We transformed Nathan Chimoi Spring into a flowing source of naturally filtered water thanks to your donation. Our team also trained the community on improved sanitation and hygiene practices. Together, these components will unlock the opportunity for community members to live better, healthier lives.
"It will definitely positively impact my life," said businesswoman Doris Mmboya. "I’m foreseeing cases of reduced water-related infections like sore throats and such. With a 20-liter container getting filled in less than 20 seconds, I’ll also save on time previously spent on scooping water to fill a container."
Doris fetches water from the new spring.
"This will help me achieve good hygiene and sanitation for me and my family," Doris continued. "I’m confident it will also help me devote my time to other things, like bringing up my children and my small business in the market."
Children were just as excited as adults about the new waterpoint.
"Safe, clean, and reliable water will definitely improve my hygiene and sanitation levels," said 14-year-old Shalleen M.
Shalleen (the second from the right in the black shirt) waves at the spring with other ladies from the community (including Doris on the left!).
"Now, with the protected spring discharging at a faster rate, the queues at the water point will be a thing of the past," Shalleen continued. "Having made fetching water simpler and faster, much of the time I have been spending fetching water will be redirected to playing with my friends, going to church, and helping out my parents in the farm or with the household chores."
Preparing for Spring Protection
Community members worked together to source and carry all locally available construction materials to the spring. These included bricks, sand, stones, and fencing poles. Some people also chiseled away at large rocks to break them down into gravel. Because people have to carry most items by hand, the material-collection process can take anywhere from a few weeks to months.
When the community was ready, we sent a lorry to deliver the remaining construction materials, including cement, plastic tarps, and hardware. Then, our construction artisan and field officers deployed to the spring to begin work. Individual households provided meals throughout each day to sustain the work team.
From Open Source to Protected Spring: A Step-by-Step Process
First, we cleared and excavated the spring area. Next, we dug a drainage channel below the spring and several runoff diversion channels above and around the spring. These help to divert surface contaminants away.
To ensure community members could still access water throughout the construction process, we also dug temporary channels from the spring's eye around the construction site. This allowed water to flow without disrupting community members' tasks or the construction work. Excavation created space for setting the spring's foundation, made of thick plastic tarp, wire mesh, concrete, and waterproof cement.
After establishing the base, we started brickwork to build the headwall, wing walls, and stairs. Once the walls had grown tall enough, we began one of the most crucial steps: setting the discharge pipe. The discharge pipe needs to be positioned low enough in the headwall so the water level never rises above the spring's eye, yet high enough to allow room for the average jerrycan (a 20-liter container) to sit beneath the pipe without making contact.
If we place the discharge pipe too high above the spring's eye, backpressure could force water to emerge elsewhere. Too low, and community members would not be able to access the water easily. We embedded the pipe using clay (or mortar when clay is in short supply) and placed it at an incline to ensure water flows in the right direction.
In coordination with brickwork, we pitched stones on both sides of the spring's drainage channel. We then cemented and plastered each stone, forming the rub walls. These walls discourage people and animals from standing in that area, which could cause soil erosion and a clogged drainage area.
We then cemented and plastered both sides of the headwall and wing walls. These finishing layers reinforce the brickwork and prevent water in the reservoir from seeping through the walls. In turn, enough pressure builds in the reservoir box to push water out through the discharge pipe.
As the headwall and wing walls cured, we cemented and plastered the stairs and installed four tiles beneath the discharge pipe. The tiles protect the concrete from the falling water's erosive force while beautifying the spring and facilitating easy cleaning of the spring floor.
The final stage of construction is backfilling the reservoir box behind the discharge pipe. We cleared the collection box of any debris that may have fallen during construction. Then we redirected the temporary diversion channels back into the reservoir box, channeling water into this area for the first time. We closed off all of the other exits to start forcing water through the discharge pipe only.
We filled up the reservoir area with the large, clean stones community members had gathered, arranging them in layers like a well-fitting puzzle. We covered the rocks with a thick plastic tarp to minimize potential contamination sources, then piled enough dirt on top to compensate for future settling.
Community members transplanted grass onto the backfilled soil to help prevent erosion. Finally, the collection area was fenced to discourage any person or animal from walking on it. Compaction can lead to disturbances in the backfill layers and potentially compromise water quality.
The entire construction process took about two weeks of work and patience to allow the cement and plaster to finish curing. As soon as the spring was ready, people got the okay from their local field officers to fetch water.
We officially handed over the spring to mark the community's ownership of the water point. Happiness, thanksgiving, and appreciation were the order of the day, flowing in all directions. Afterward, community members invited our staff members and artisans to dinner at one of the members' households as a thanks for all their hard work.
A staff member trains community members on how to care for the spring.
Training on Health, Hygiene, and More
Together with the community, we found their preferred date for training while considering other community calendar events, such as the agricultural season and social events. We requested a representative group of community members to attend training and relay the information learned to the rest of their family and friends.
When the day arrived, facilitators Patience Njeri and Elvis Afuya deployed to the site to lead the event. 10 people attended the training, including seven women and three men. Normally, we would have had more attendees, but a political aspirant had a rally nearby, and one of the community elders' funerals was the same day. However, those present promised to relay the information to the rest of the community.
We covered several topics, including community participation in the project, leadership and governance, personal and environmental hygiene, water handling and treatment, spring maintenance, dental hygiene, the ten steps of handwashing, disease prevention, and how to make and use handwashing stations.
During the leadership and governance session, we held an election for the newly formed water user committee leaders, who will oversee the maintenance of the spring. We also brainstormed income-generating activities. Community members can now start a group savings account for any future minor repairs to the spring and a cooperative lending group, enabling them to develop small businesses.
Soap-making was the participants' favorite topic. Due to inflated prices in Kenya at the moment, participants had been finding it hard to buy soap. Knowing that they could make their own soap using easy-to-find ingredients lifted that burden from their shoulders. Doris even noted the lesson as a business opportunity.
"This training was very informative," Doris said. "I have learned a number of things regarding hygiene and sanitation, which will help me improve the hygiene and sanitation standards of my household. More importantly, I have learned how to make soap, something I will consider incorporating into my small-scale enterprise."
Another subject that provoked a lot of discussion was personal hygiene. The training facilitators were grateful for the community members' honesty on this subject, with some confessing that the water crisis meant they didn't bathe even after a long day of manual labor because fetching water seemed too daunting. Others said that they have never owned a toothbrush in their lives.
Conclusion
This project required a substantial collaboration between our staff, our in-country teams, and the community members themselves. When an issue arises concerning the spring, the water user committee is equipped with the necessary skills to rectify the problem and ensure the water point works appropriately. However, if the issue is beyond their capabilities, they can contact their local field officers to assist them.
Also, we will continue to offer them unmatchable support as a part of our monitoring and maintenance program. We walk with each community, problem-solving together when they face challenges with functionality, seasonality, or water quality. Together, all these components help us strive for enduring access to reliable, clean, and safe water for this community.
With your contribution, one more piece has been added to a large puzzle of water projects. In our target areas, we’re working toward complete coverage of reliable, maintained water sources within a 30-minute round trip for each community, household, school, and health center. With this in mind, search through our upcoming projects to see which community you can help next!
Thank you for making all of this possible!
Rehabilitation Project
