November, 2021: Mikalo Spring Project Complete!

Shikulu Community now has access to clean water! We transformed Mikalo Spring into a flowing source of water, thanks to your donation. Our team protected the spring and trained the community on improved sanitation and hygiene practices, including COVID-19 prevention.

"I will be spending less on hospital bills. I'll have some money to save. Months before the protection of the spring, my children among others in the community were victims of acute diarrheal diseases that drained me financially while catering for their hospital bills," said Mary Minyusi, 46.

Children were just as excited as the adults about the new water point.

Twelve-year-old Rebah M. said, "I'll start a kitchen garden at home since there is reliable, safe water for my vegetables. Thus, [I] will help my parents start saving for my future (studies)."

Preparing for Spring Protection

Community members worked together to source and carry all locally available construction materials to the spring. These included bricks, sand, stones, and fencing poles. Some people also chiseled away at large rocks to break them down into gravel. Because people have to carry most items by hand, the materials collection process can take anywhere from a few weeks to months.

When the community members had prepared everything, we sent a lorry to the community to deliver the rest of the construction materials, including the cement, plastic tarps, and hardware. Then, our artisan and field officers deployed to the spring to begin work. Individual households provided meals throughout each day to sustain the work team.

From Open Source to Protected Spring: A Step-by-Step Process

At last, it was time to dig in at the spring! Locals lent their strength to the artisans each day to help with the manual labor. First, we cleared and excavated the spring area. Next, we dug a drainage channel below the spring and several surface runoff diversion channels above and around the spring. These help to divert environmental contaminants carried by the rains away from the spring.

To ensure community members could still fetch water throughout the construction process, we also dug temporary diversion channels from the spring's eye around the construction site. This allowed water to flow without severely disrupting community members' water needs or the construction work.

Excavation created space for setting the spring's foundation, which is made of thick plastic tarp, wire mesh, concrete, and waterproof cement. After setting the base, we started brickwork to build the headwall, wing walls, and stairs.

Next, we began one of the most crucial spring protection steps to ensure a fully functional water point: setting the discharge pipe. The discharge pipe has to be low enough in the headwall so that the water level inside never rises above the spring's eye, yet high enough to leave eighteen to twenty inches between the pipe and the spring floor. This allows room for the average jerrycan (a 20-liter container) to sit beneath the pipe without making contact.

If we place the discharge pipe too high above the spring's eye, too much backpressure could force the flow to emerge elsewhere. Too low, and community members would not be able to access the water easily. We embedded the pipe using clay (or mortar when clay is in short supply) and placed it at an incline to ensure water flows in the right direction.

In coordination with brickwork, we pitched medium to large stones on both sides of the spring's drainage channel. We then cemented and plastered each stone group into place, forming the rub walls. This helps discourage people and animals from standing in that area, which could cause soil erosion and thus a clogged drainage area.

We then turned to cementing and plastering both sides of the headwall and wing walls. These finishing layers reinforce the brickwork and prevent water in the reservoir from seeping through the walls. In turn, enough pressure builds in the reservoir box to push water out through the discharge pipe.

As the headwall and wing walls were curing, we cemented and plastered the stairs and installed four tiles beneath the discharge pipe. The tiles protect the concrete from the falling water's erosive force while beautifying the spring and facilitating easy cleaning of the spring floor.

We transitioned to the final stages of construction with the tiles in place - backfilling the reservoir box. First, we cleared the collection box of any debris that may have fallen in since its construction, such as dead leaves or other items. Then we redirected the temporary diversion channels back into the reservoir box, channeling water into this area for the first time. We closed off all of the other exits to start forcing the water through the discharge pipe only.

With much help from the community, we filled up the reservoir area with the clean and large stones they gathered, arranging them in layers like a well-fitting puzzle. We covered the rocks with a thick plastic tarp to minimize potential contamination sources from aboveground, followed by a layer of soil. We piled enough dirt on top to create a slight mound to compensate for the backfill's future settlement.

Community members transplanted grass onto the backfilled soil to help prevent erosion. Finally, the collection area was fenced to discourage any person or animal from walking on it since compaction can lead to disturbances in the backfill layers and potentially compromise water quality.

The entire construction process took about two weeks of work and patience to allow the cement and plaster to finish curing. As soon as it was ready, people got the okay from our field officers to fetch water. We officially handed over the spring to mark the community's ownership of the water point. Happiness, thanksgiving, and appreciation were the order of the day, flowing in all directions.

Community members gathered around the spring with songs of praise in the local dialect to The Water Project and to God for a great job of protecting their spring. Ululation filled the air and thanks were given by a community leader.

Training on Health, Hygiene, COVID-19, and More

Due to the ongoing challenges and restrictions amidst the pandemic, we worked with local leaders and the national Ministry of Health to gain approval for a small group training about health, hygiene, and COVID-19 prevention.

Together with the community, we found their preferred date for training while considering other community calendar events, such as the agricultural season and social events. The community mobilizer recruited participants by going house to house informing people about the training. For those that were not home, she called them by cell phone just to ensure that no one was left behind.

When the day arrived, facilitators, Jemmimah Khasoha and Victor Musemi deployed to the site to lead the event. Thirteen (13) people attended the training, including self-help group members and community-based leaders. There were nine women and four men in attendance. We held the training under trees just next to the spring.

Perhaps the most crucial topic of the day was our session on COVID-19 prevention and control. Due to the rampant spread of misinformation about COVID-19, we dedicated time to a question and answer session to help debunk rumors about the virus and provide extra information where needed.

We covered several other topics, including community participation in the project; leadership and governance; personal and environmental hygiene; water handling and treatment; operation and maintenance of the spring; dental hygiene; the ten steps of handwashing; and how to make and use a tippy tap and leaky tin. In addition, we held an election for the newly formed water user committee leaders during the leadership and governance session.

One of the most memorable topics for the group was soap making. No one in the group knew how to make soap or even where to get the chemicals that are used to make it. They were happy to learn the new information, get to take some soap home with them and have the new skill for the future.

We also brainstormed income-generating activities that community members can use to start a group savings account for any future minor repairs to the spring and a cooperative lending group to enable members to develop small businesses.

Learning about spring maintenance.

When an issue arises concerning the spring, the water user committee is equipped with the necessary skills to rectify the problem and ensure the water point works appropriately. However, if the issue is beyond their capabilities, they can contact our field officers to assist them. Also, we will continue to offer them unmatchable support as a part of our ongoing monitoring and maintenance program.

Thank you for making all of this possible!

October, 2021: Shikulu Community, Mikalo Spring Project Underway!

A severe clean water shortage in Shikulu Community drains people’s time, energy, and health. Thanks to your generosity, we’re working to install a clean water point and much more.

Get to know this community through the introduction and pictures we’ve posted, and read about this water, sanitation, and hygiene project. We look forward to reaching out with more good news!