June, 2022: Musaa Shikoti Community Spring Protection Complete!

Musaa Shikoti Community now has access to clean water! We transformed Mugonjia Spring into a flowing source of naturally filtered water thanks to your donation. Our team also trained the community on improved sanitation and hygiene practices. Together, these components will unlock the opportunity for community members to live better, healthier lives.

Community members celebrate their protected spring.

Evelyn Lumiti, a 52-year-old businesswoman, said, "I cannot control my happiness to see water flowing from the pipe. It has been such a long wait coupled with misery and suffering because the spring was not in good condition. Now it is easy to access at the water point. Given that water is now readily available, I will have more time to engage in other economic activities in order to improve the livelihood of my family."

Evelyn.

Children were just as excited as adults about the new waterpoint.

A little one enjoying a drink.

We interviewed 13-year old Melody K before the spring protection. Back then, her largest challenge was not being able to collect water quickly enough, which at times led to her being punished at home.

But now, Melody said, "After school, I will not waste time at the spring queuing for water. I will use the water to bathe, wash my school uniform, and also wash my beddings."

Melody.

Preparing for Spring Protection

Community members worked together to source and carry all locally available construction materials to the spring. These included bricks, sand, stones, and fencing poles. Some people also chiseled away at large rocks to break them down into gravel. Because people have to carry most items by hand, the material-collection process can take anywhere from a few weeks to months.

Community children helping collect construction items.

When the community was ready, we sent a lorry to deliver the remaining construction materials, including cement, plastic tarps, and hardware. Then, our construction artisan and field officers deployed to the spring to begin work. Individual households provided meals throughout each day to sustain the work team.

From Open Source to Protected Spring: A Step-by-Step Process

At last, it was time to dig in at the spring! Locals lent their strength to the artisans to help with the manual labor.

First, we cleared and excavated the spring area. Next, we dug a drainage channel below the spring and several runoff diversion channels above and around the spring. These help to divert surface contaminants away.

Site clearance.

To ensure community members could still access water throughout the construction process, we also dug temporary channels from the spring's eye around the construction site. This allowed water to flow without disrupting community members' tasks or the construction work.

Building the foundation.

Excavation created space for setting the spring's foundation, made of thick plastic tarp, wire mesh, concrete, and waterproof cement. After establishing the base, we started brickwork to build the headwall, wing walls, and stairs.

Once the walls had grown tall enough, we began one of the most crucial steps: setting the discharge pipe. The discharge pipe needs to be positioned low enough in the headwall so the water level never rises above the spring's eye, yet high enough to allow room for the average jerrycan (a 20-liter container) to sit beneath the pipe without making contact.

Setting the discharge pipe.

If we place the discharge pipe too high above the spring's eye, backpressure could force water to emerge elsewhere. Too low, and community members would not be able to access the water easily. We embedded the pipe using clay (or mortar when clay is in short supply) and placed it at an incline to ensure water flows in the right direction.

In coordination with brickwork, we pitched stones on both sides of the spring's drainage channel. We then cemented and plastered each stone, forming the rub walls. These walls discourage people and animals from standing in that area, which could cause soil erosion and a clogged drainage area.

Creating rub walls.

We then cemented and plastered both sides of the headwall and wing walls. These finishing layers reinforce the brickwork and prevent water in the reservoir from seeping through the walls. In turn, enough pressure builds in the reservoir box to push water out through the discharge pipe.

As the headwall and wing walls cured, we cemented and plastered the stairs and installed four tiles beneath the discharge pipe. The tiles protect the concrete from the falling water's erosive force while beautifying the spring and facilitating easy cleaning of the spring floor.

Installing tiles on the spring floor.

The final stage of construction is backfilling the reservoir box behind the discharge pipe. We cleared the collection box of any debris that may have fallen during construction. Then we redirected the temporary diversion channels back into the reservoir box, channeling water into this area for the first time. We closed off all of the other exits to start forcing water through the discharge pipe only.

We filled up the reservoir area with the large, clean stones community members had gathered, arranging them in layers like a well-fitting puzzle. We covered the rocks with a thick plastic tarp to minimize potential contamination sources, then piled enough dirt on top to compensate for future settling.

Backfilling the spring box.

Community members transplanted grass onto the backfilled soil to help prevent erosion. Finally, the collection area was fenced to discourage any person or animal from walking on it. Compaction can lead to disturbances in the backfill layers and potentially compromise water quality.

Community members helping transplant grass.

The entire construction process took about two weeks of work and patience to allow the cement and plaster to finish curing. As soon as the spring was ready, people got the okay from our field officers to fetch water.

Excited community members.

We officially handed over the spring to mark the community's ownership of the water point. Happiness, thanksgiving, and appreciation were the order of the day, flowing in all directions. Community members expressed their appreciation and celebrated the flowing water by singing and dancing.

Training on Health, Hygiene, COVID-19, and More

Together with the community, we found their preferred date for training while considering other community calendar events, such as the agricultural season and social events. We requested a representative group of community members to attend training to relay the information learned to the rest of their family and friends.

When the day arrived, facilitators Mary Afandi and Rose Amulavu deployed to the site to lead the event. 34 people attended the training, including 22 women and 12 men. We held the training under the shade of trees on the landowner's homestead.

Opening the training with prayer.

We covered several topics, including community participation in the project, leadership and governance, personal and environmental hygiene, water handling and treatment, spring maintenance, dental hygiene, the ten steps of handwashing, disease prevention, and how to make and use handwashing stations.

Participants listening.

During the leadership and governance session, we held an election for the newly formed water user committee leaders, who will oversee the maintenance of the spring. We also brainstormed income-generating activities. Community members can now start a group savings account for any future minor repairs to the spring and a cooperative lending group, enabling them to develop small businesses.

Practicing soap making.

Participants were eager to learn soapmaking and found it to be a very interesting topic. One of the participants, Madam Everlyne, said that they have been buying diluted liquid soap from the market which was not of good quality compared to the one that they had participated in making. She said she will be among the soap sellers so she can generate income.

Moses.

Moses Nandwa, 23, the community volunteer health worker, shared, "The training was valuable to me because I have been taught how to make liquid soap and where I can get the chemicals. I will use the knowledge learned to make quality soap to use and also sell some at the market so that I can earn an extra coin."

When an issue arises concerning the spring, the water user committee is equipped with the necessary skills to rectify the problem and ensure the water point works appropriately. However, if the issue is beyond their capabilities, they can contact our field officers to assist them. Also, we will continue to offer them unmatchable support as a part of our ongoing monitoring and maintenance program.

Thank you for making all of this possible!

April, 2022: Musaa Shikoti Community Spring Protection Underway!

A severe clean water shortage in Musaa Shikoti Community drains people’s time, energy, and health. Thanks to your generosity, we’re working to install a clean water point and much more.

Get to know this community through the introduction and pictures we’ve posted, and read about this water, sanitation, and hygiene project. We look forward to reaching out with more good news!