April, 2022: Litinye Community Spring Protection Complete!

Litinye Community now has access to clean water! We transformed Mutumamu Spring into a flowing source of naturally filtered water thanks to your donation. Our team also trained the community on improved sanitation and hygiene practices. Together, these components will unlock the opportunity for community members to live better, healthier lives.

Farmer Jane Namusasi, 40, said, "My living standards will improve because I have been in and out of [the] hospital after taking water from this particular spring before it was protected. Now, I can take it freely knowing that contamination routes have been blocked."

Jane at the spring.

Children were just as excited as adults about the new waterpoint.

"To me, there will be peace and respect because initially, children would quarrel with elderly people at the water, which was not good. With peace in [the] community, a lot will be achieved," said Philip W., age 12.

Philip at the spring.

He continued, "Before the spring was protected I use to waste a lot of time when fetching water, but now this will make everything easy and faster. This means I will take [a] very short time to draw water and go back home to continue with my school work. [I] am sure my academic performance will improve."

Preparing for Spring Protection

Community members worked together to source and carry all locally available construction materials to the spring. These included bricks, sand, stones, and fencing poles. Some people also chiseled away at large rocks to break them down into gravel. Because people have to carry most items by hand, the material-collection process can take anywhere from a few weeks to months.

When the community was ready, we sent a lorry to deliver the remaining construction materials, including cement, plastic tarps, and hardware. Then, our construction artisan and field officers deployed to the spring to begin work. Individual households provided meals throughout each day to sustain the work team.

From Open Source to Protected Spring: A Step-by-Step Process

At last, it was time to dig in at the spring! Locals lent their strength to the artisans to help with the manual labor.

First, we cleared and excavated the spring area. Next, we dug a drainage channel below the spring and several runoff diversion channels above and around the spring. These help to divert surface contaminants away.

To ensure community members could still access water throughout the construction process, we also dug temporary channels from the spring's eye around the construction site. This allowed water to flow without disrupting community members' tasks or the construction work.

Excavation created space for setting the spring's foundation, made of thick plastic tarp, wire mesh, concrete, and waterproof cement. After establishing the base, we started brickwork to build the headwall, wing walls, and stairs.

Once the walls had grown tall enough, we began one of the most crucial steps: setting the discharge pipe. The discharge pipe needs to be positioned low enough in the headwall so the water level never rises above the spring's eye, yet high enough to allow room for the average jerrycan (a 20-liter container) to sit beneath the pipe without making contact.

If we place the discharge pipe too high above the spring's eye, backpressure could force water to emerge elsewhere. Too low, and community members would not be able to access the water easily. We embedded the pipe using clay (or mortar when clay is in short supply) and placed it at an incline to ensure water flows in the right direction.

In coordination with brickwork, we pitched stones on both sides of the spring's drainage channel. We then cemented and plastered each stone, forming the rub walls. These walls discourage people and animals from standing in that area, which could cause soil erosion and a clogged drainage area.

We then cemented and plastered both sides of the headwall and wing walls. These finishing layers reinforce the brickwork and prevent water in the reservoir from seeping through the walls. In turn, enough pressure builds in the reservoir box to push water out through the discharge pipe.

As the headwall and wing walls cured, we cemented and plastered the stairs and installed four tiles beneath the discharge pipe. The tiles protect the concrete from the falling water's erosive force while beautifying the spring and facilitating easy cleaning of the spring floor.

The final stage of construction is backfilling the reservoir box behind the discharge pipe. We cleared the collection box of any debris that may have fallen during construction. Then we redirected the temporary diversion channels back into the reservoir box, channeling water into this area for the first time. We closed off all of the other exits to start forcing water through the discharge pipe only.

We filled up the reservoir area with the large, clean stones community members had gathered, arranging them in layers like a well-fitting puzzle. We covered the rocks with a thick plastic tarp to minimize potential contamination sources, then piled enough dirt on top to compensate for future settling.

Community members transplanted grass onto the backfilled soil to help prevent erosion. Finally, the collection area was fenced to discourage any person or animal from walking on it. Compaction can lead to disturbances in the backfill layers and potentially compromise water quality.

The entire construction process took about two weeks of work and patience to allow the cement and plaster to finish curing.

The community members were happy to have the project finished. Immediately upon completion, the field officer in charge handed it over to the community officials and community members.  She asked them to put into practice what they had learned to ensure the water point stays clean and functional throughout the year. They promised to keep their spring clean and neat.

Happiness, thanksgiving, and appreciation were the order of the day, flowing in all directions.

Training on Health, Hygiene, COVID-19, and More

Together with the community, we found their preferred date for training while considering other community calendar events, such as the agricultural season and social events. We requested a representative group of community members to attend training to relay the information learned to the rest of their family and friends.

When the day arrived, facilitators Stella Inganji and Betty Muhongo deployed to the site to lead the event. 22 people attended the training, including 15 women and seven men. We held the training at the landowner's homestead, under a big, indigenous tree.

We covered several other topics, including community participation in the project, leadership and governance, personal and environmental hygiene, water handling and treatment, spring maintenance, dental hygiene, the ten steps of handwashing, disease prevention, and how to make and use handwashing stations.

During the leadership and governance session, we held an election for the newly formed water user committee leaders, who will oversee the maintenance of the spring. We also brainstormed income-generating activities. Community members can now start a group savings account for any future minor repairs to the spring and a cooperative lending group, enabling them to develop small businesses.

Water committee members.

The topic that kept people most engaged was soap-making. Participants were keen to learn the process and asked many questions for clarification. At the end of the session, everyone wanted to know where to get the detergent so they could make their own soap.

Farmer and treasurer of the water committee, Christine Meshack, shared her experience during the training. "I thank God for this team. Many times [I] have been wondering what else can I do apart from a being a farmer. [I] am so happy because I have gained knowledge on how to make liquid soap that will boost my living standards. Apart from that, I have learned a lot on sanitation matters."

Group photo of participants.

When an issue arises concerning the spring, the water user committee is equipped with the necessary skills to rectify the problem and ensure the water point works appropriately. However, if the issue is beyond their capabilities, they can contact our field officers to assist them. Also, we will continue to offer them unmatchable support as a part of our ongoing monitoring and maintenance program.

Thank you for making all of this possible!

February, 2022: Litinye Community 3 Spring Protection Underway!

A severe clean water shortage in Litinye drains people’s time, energy, and health. Thanks to your generosity, we’re working to install a clean water point and much more.

Get to know this community through the introduction and pictures we’ve posted, and read about this water, sanitation, and hygiene project. We look forward to reaching out with more good news!